• Dansk webshop
  • Lyd og lys siden 2001
  • Perfekt og hurtig service

ClearOne BMA CT 600 loftmikrofon array m/ 2 x 10 W amp

ClearOne BMA CT 600 loftmikrofon array m/ 2 x 10 W amp

54.028,00 kr. Inkl. moms

CLEARONE BMA CT 600 LOFTMIKROFON ARRAY

Ukendt lagerstatus
Kontakt os, tlf. 76400693
Varenummer (SKU): CLO-910-3200-205-I Kategori: Tags: , , ,

Specifikationer og beskrivelse

The BMA CT is a patented ceiling tile beamforming microphone array that blends in perfectly with today’s drop ceilings. Built-in acoustic echo cancellation, noise cancellation, and beam selection eliminate the need for per-beam processing in a DSP mixer - requiring fewer DSP mixer resources.

> Integrated features can significantly
reduce system design complexity, simplify
installation, consume less rack space, and
lower cost.
> Daisy-chain up to three ceiling tiles via
P-Link for larger conference setups –
for simpler wiring and longer distances
compared to networked “home run”
connections.
> Each ceiling tile microphone array supports
long distance P-Link mode with 200 m / 650
ft between tiles, for a total cable reach of
600 m / 1950 ft
> Single workflow for configuration using Pro
Console® software. No need to program
separate components: Ethernet switch,
BMA CT, Dante® controller, and DSP mixer.
> ClearOne’s BMA technology is protected by
at least a dozen patents and pending patent
applications.
> Supports three different ceiling grid types:
24-inch, 600 mm, and 625 mm; as well as
hard-ceiling mounts.
> It’s all about the ClearOne architecture!

24 MICROPHONES
•Number of Beams: Two patterns, either 5 or 6 beams
•Polar Pattern: Custom
•Frequency Response: 150Hz – 16kHz, +/- 3dB
•Dynamic Range: 150Hz – 16kHz, > 70dB
AMPLIFIER OUTPUT
•Uses P-Llink channels and C-Link channels based on
configuration
•Type: 5.08mm Black Header, Male, Phoenix type
Euroblock
•Audio: 2 channels
•Output Power: 2x10W Max, 8Ω load*
•Frequency Response: 20Hz – 22kHz @ +10dBu, +/
0.5dB
•THD + Noise: 20Hz – 22kHz @ +10dBu, 1W, < 0.2%
•Dynamic Range: 20Hz – 22kHz @ +20dB, > 102dB,
with 20kHz digital low pass filter
•Crosstalk: Channel to Channel, stimulus at +20dBu
receptor 10W output 8Ω load, 20Hz – 22kHz,
< -60dB
LED
•4 LED indicators on one end of unit:
•Mute/Un-mute configuration with 8 color options, two
blink patterns and warning indications
CONFIGURATION
•Beam enable/disable
•Acoustic Echo Cancellation (AEC) on/off
•Noise Cancellation (NC) on/off
•Filters:
All Pass
Low Pass
High Pass
Notch
PEQ
•Automatic Level Control (ALC) on/off
•Gain adjust
•Mute on/off
•Auto gate/Manual gate

P-LINK PERIPHERAL BUS
•P-Link In & Out: Proprietary Network
•Ports Type: RJ-45
•Cable: RJ45 Cat5e, Cat6, Expandable
•Distance: Up to 650 ft.
•Daisy-Chain:
•Up to 3 Array units and additional P-Link
compatible devices with each supported
CONVERGE Pro 2 unit in the same chain
•Up to 6 array units in the same P-Link chain with
2 supported CONVERGE Pro 2 units connected
through C-Link
•Long Distance P-Link:
•Increases P-Link distance from 200 ft. to 650 ft.;
(200M) max cable distance between any two units;
Cat6, 550 MHz, 23 AWG, solid conductor cable;
•Do not use Copper Clad Aluminum (CCA) cable
POWER SELECTION SWITCH
•Type: Slide Switch
•Slide toward P-Link to power device by P-Link
•Slide toward PoE to power device by PoE Injector
CONFIGURATION & ADMINISTRATION SOFTWARE
•Pro CONSOLE® Software
MOUNTING
• Ceiling mount (24” or 600mm drop-ceiling grid)
POWER & THERMAL
•Power Type: PoE
•Port Type: RJ-45
•Power Source: PoE Injector or equivalent
•PoE: IEEE 802.3at compliant devices providing 56V
and 640 mA (36 W).
•P-Link In - Mode B
•PoE In - Mode A and Mode B
*BMA CT requires its own PoE (IEEE 802.3 at
compliant) if 2x10W speakers are driven
•Power Consumption:
•100-240VAC, 50/60Hz
•9.1 Watt typical without speaker amp
•38W at max power 1kHz (2 x 10W)
•Thermal: 130 BTU/Hr at max power
•Operating Temperature: 14° F/-10° C to 104° F/40° C
ambient temperature

DIMENSION & WEIGHT (WxHxD)
•24” BMA CT:
23.72 x 23.72 x 2.13” (602.5 x 602.5 x 54.1mm)
•600 mm BMA CT:
592.5 x 592.5 x 54.1 mm (23.33 x 23.33 x 2.13”)
•Unit Weight: 7.7lbs (3.5kg)
•Shipping Weight: 11.5lbs (5.2kg)

Mere som dette